Windscreen Monitor
TC-M213_CNTL- Windscreen-mounted display, 93 × 57 × 28 mm, 70 g
- Solar panel with USB charging socket, DC 5V
- Supplied with a USB cable and adhesive mount
A windscreen-mounted, solar-charged tyre pressure monitoring system for cars, SUVs and 4x4s. Four sensors, an alert the moment a tyre drifts out of range, and nothing to wire in or subscribe to.
Sensors are available internal or valve-mounted, in sets of four or six, so a spare wheel can be carried as an extra position. Built to GB26149-2017.
One monitor, four or six sensors and the tools to fit them.
Inflate every tyre to its correct pressure first. Whatever it reads at pairing becomes the reference the alerts are measured against.
Give it at least 2.5 hours on USB before first use, then mount it on a clean, dry section of windscreen where it does not obstruct your view.
Valve sensors wind on two turns only, without tightening yet. Internal sensors are pre-paired to a wheel position and fitted with the tyre off the rim.
Hold SET and + for 3 seconds, pick a wheel, then tighten that sensor fully. The monitor beeps and the reading appears.
The pressure at pairing becomes the reference, so the alerts fit your vehicle without you entering a single figure.
| Operating temperature | −20°C to 80°C |
|---|---|
| Storage temperature | −30°C to 85°C |
| Input voltage | DC 5V |
| Charging | Solar panel, with USB charging socket |
| Frequency | 433.92 MHz |
| Dimensions (l × w × h) | 93 × 57 × 28 mm |
| Weight | 70 g |
| Units | Bar or psi · °C or °F |
The TC-MZ413 variant shares these specifications.
Identical to the TC-M423 sensors.
| Pressure range | 0–6 Bar (0–87 psi) |
|---|---|
| Pressure accuracy | ±0.1 Bar (±1.5 psi) |
| Temperature accuracy | ±3°C |
| Operating temperature | −40°C to 80°C |
| Storage temperature | −40°C to 85°C |
| Frequency | 433.92 MHz |
| Transmission power | <10 dBm |
| Dimensions | 21 mm dia. × 16 mm |
| Weight | 10 g |
Ask us about availability and pricing.
Request pricing